CareerExamPro

Hyperscale Data Center Technician & Critical Facilities Screen practice test

30 practice questions for this exam, each with a full explanation and cited rule or blueprint reference.

Start practicing

CDCP, CDCS, DCCA & Cisco CCT Data Center: practice drill

10 realistic exam questions, graded as you go, with the exact rule or statute citation for every answer. Start free, no sign-up.

Timed mock exam

30 questions in 36 minutes, drawn from every topic. No answers shown until the end, then a full score breakdown, your weakest topics and a review of what you missed.

Exam Snapshot & Official Blueprint

Official Exam Fee
Employer technical screen (AWS / Meta / Google / Colocation)
Format & Time Limit
Timed hardware, fiber, Linux/IPMI & electrical safety assessment
Passing Standard
Role-dependent hiring bar (~75%–80%+ accuracy)
Typical Prep Incumbents
No standardized incumbent prep course

Official Domain Breakdown

Exam DomainWeight
Server Hardware, Rack U-Height, RAID Troubleshooting & POST/BMC Triage32%
Structured Cabling, Single/Multi-Mode Fiber, SFP+/QSFP & Optical Cleaning26%
Critical Electrical Safety (LOTO, NFPA 70E), A/B Feeds & Change Control24%
Thermal Containment, Leak Detection & Incident Escalation Procedures18%

High-Yield Formulas, Statutes & Rules Cheat Sheet

Frequently Asked Questions

What do hyperscale data center technician interviews test most heavily?

Hyperscale screens focus on practical triage: RAID recovery, BIOS/POST/BMC (IPMI/iDRAC/iLO) diagnostics, single-mode vs. multi-mode fiber optics, A/B PDU power balancing, airflow containment, and strict LOTO safety.

Practice tests that prepare you for this exam

Practice by topic

About this exam

Agency / Issuer
AWS / Meta / Google / Colocation
Region
Global / Online

Exact question counts, passing scores, and allowed reference materials vary by testing window and state/agency. Always confirm current rules with the official testing provider.

Sample questions

Under EIA-310-D / IEC 60297 rack standards, what is the vertical height of one rack unit (1U), and where should the heaviest storage JBODs or rack-mount UPS units be installed inside a 42U cabinet?

  1. 1.75 in (44.45 mm); mount heaviest chassis at the bottom for stability.
  2. 2.00 inches (50.80 mm); mount the heaviest chassis at the top to aid natural convection cooling.
  3. 1.50 inches (38.10 mm); mount the heaviest chassis in the middle at 20U–24U for ergonomic access.
  4. 1.75 inches (44.45 mm); mount the heaviest chassis at the top so overhead cable trays support them.
Show the answer

A. 1.75 in (44.45 mm); mount heaviest chassis at the bottom for stability.

One standard rack unit (1U) equals 1.75 inches (44.45 mm), containing three mounting holes spaced across the rail. Heavy equipment (UPS modules, battery packs, dense storage enclosures) must always be mounted at the bottom of the rack to lower the center of gravity and prevent tip-over hazards when sliding rails out.

Reference: ANSI/EIA-310-D & IEC 60297-3-100 — 19-Inch Rack Standards

A critical power subsystem has a documented Mean Time Between Failures (MTBF) of 9,995 hours and a Mean Time To Repair (MTTR) of 5 hours. What is the steady-state availability of this subsystem?

  1. 99.999%, which meets the five-nines benchmark of roughly 5.26 minutes of downtime per year.
  2. 99.50%, because 5 hours of repair time represents half a percent of each thousand hours.
  3. 99.90%, because availability is calculated by subtracting MTTR from MTBF and dividing by 10,000.
  4. 99.95%, calculated as MTBF divided by the sum of MTBF plus MTTR (9,995 / 10,000).
Show the answer

D. 99.95%, calculated as MTBF divided by the sum of MTBF plus MTTR (9,995 / 10,000).

Steady-state availability is defined as A = MTBF / (MTBF + MTTR). Here, 9,995 / (9,995 + 5) = 9,995 / 10,000 = 0.9995, or 99.95%. Five-nines (99.999%) would require an MTBF-to-MTTR ratio of roughly 99,999 to 1.

Reference: IEEE 493 (Gold Book) & ANSI/TIA-942-C Reliability Calculations

A technician decommissions four 2U compute nodes from the middle of a 42U cabinet in a cold-aisle-contained row, leaving an 8U open gap. Why must snap-in blanking panels be installed immediately?

  1. To provide structural shear bracing required to hold the remaining servers on their slide rails.
  2. To block hot rear exhaust from recirculating into cold server intakes.
  3. To increase static air pressure inside the hot aisle so CRAC return fans draw less electrical current.
  4. To satisfy NFPA 70E arc-flash containment rules for low-voltage Ethernet patch cables.
Show the answer

B. To block hot rear exhaust from recirculating into cold server intakes.

Open U-spaces create a low-resistance short circuit allowing hot exhaust air from the rear of the rack to pull straight back into the cold aisle and enter adjacent server intakes, causing localized thermal hotspots and higher server fan power draw. Installing blanking panels seals the front plane.

Reference: ASHRAE TC 9.9 & ANSI/TIA-942-C Section 5 — Rack Blanking Panels

Taking this exam soon?

Tell us which exam domains or calculation drills you want more practice on.

Other AI Data Center & Critical Ops exams